Meet the Rankins 2004 @ Northleach
Damn this has been a long time since I posted anything on here. Well I have added a few accessories to the Land Rover over the past few years. Bits like a LED Amber Lightbar, CB Radio, Amateur Radio, Phone charger, On-Board Camera, Rear Work Lights, and Driving Lights. These I have wired in one by one but now after several years of abuse I think I need to look at wiring up the stuff properly. Partly as my job working in the calibration industry means I get to see how the professionals wire up stuff. First stage was to purchase and fit a extra battery mount. This isn''t a necessary requirement but its a nice to have feature as with the correct wiring I won''t run down the starter battery if I happen to leave the rear work lamps on for a few hours. Now the battery mount I bought was a excellent kit from a chap called Ryan Wild (W1LDR). This has been fitted for best part of a year but due to a lack of funds I never got around to fitting a Leisure battery. The Battery, Well the best battery to fit in this place is a leisure battery as they are better for discharging and re-charging. They have less Amp output but they deal with running stuff far better. Now the battery tray measures 240mm (w) x 170mm (d) x 200mm (h) which is a damn annoying size to find for a battery so for the time being I have fitted a Yuassa 50Ah 63 type battery which is a bit small in the space I have but its not overly expensive of a battery but it does allow me to get started on this project. Charging the Battery, From looking around I decided I wanted a 16A Smart Relay Charging Unit from eBay for £15. What this does it allows me to charge the second battery once the main starting battery has been charged up. Some people will just wire the batteries together but remember that means you get the combined power of two batteries but once you discharge them both will be out of power plus you have to ensure that both batteries are of the same power output otherwise one will always be trying to over charge the other.